Single-Phase Two-Wire Electronic DIN-Rail Active Energy Meter (2-Pole, LCD Display)

display electronic

INQUIRY PRECISE INQUIRY

Description

Basic Info

Display: Digital
Usage: Watt-Hour Meter, Standard Electric Energy Meter
Theory: Electronic Meter
Measured Signal: Pulse Peak
Certification: ISO
Trademark: Customization
Origin: China

Installation: Direct Connected
Electric Equipment: Single-phase
Power Meter Connection: Terminal
Type: Energy Meter
Customized: Customized
Transport Package: by Carton
HS Code: 9028301300

Product Description

single phase two wire electronic DIN-rail active energy meter.
The meter is used to measure 50Hz or 60Hz active energy consumption from single phase two wire AC electricity net.
The features of small size and DIN-rail mounting make it suitable for installation in distribution boards and small standard enclosures.
The meter is widely used in the office buildings, shopping malls, residences, airports and metro,etc.

FUNCTIONS AND FEATURES

♦35mm standard DIN rail installation,complying with standard DIN EN50022.
♦Two poles width.
♦Step motor type impulse cyclometer display (standard 6+1 digits) or clients defined.
♦Standard configuration one port of pulse output passive (polarity).May select increase a distant port of pulse output passive
(nonpolarity). And contact with all kinds of AMR system conveniently.Complying with standard IEC62053-21 and DIN43864.
♦Bicolor LED instructions respectively power supply state (green) and signal or power impulse(red).
♦Automatic detection the direction of the trend of load current. And Instructions on individual LED (Only red power impulse signal when
working.If no green power means the load current is reverse).
♦Single direction measures single phase two wire active power consumption.It is nothing with direction of the flow of load current, complying with standard IEC62053-21,IEC62052-11. Anti-tampering function is available.
♦Directly connect operation.
♦Standard configuration short terminal cover, which is helpful to reduce installation space and make it convenient to install;May select extended terminal cover, which is for protecting the safety of using electricity.

TECHNICAL PARAMETERS

Accuracy	Class 1.0
Rated voltage	110VAC,120VAC,220VAC,230VAC,240VAC, etc.
Operation voltage range	Un±20%
Insulation capabilities	AC voltage withstand 2kV for 1 minute;Impulse voltage withstand 6kV - 1.2/50μs waveform
Rated current	5(30)A,5(60)A,10(40)A,10(60)A,15(60),etc.
Operation current range	0.05Ib~ Imax
Starting current	0.004Ib
Rated frequency	50Hz or 60 Hz
Internal power consumption	Voltage circuit ≤1.0W 5VA; Current circuit ≤1VA(Ib)
Interface	optical coupler (SO corresponding to DIN 43864)
Impulse valence Ra	0.5 or 1.0 Wh/imp
Max.operation temperature	-40°C ~ +80°C
Max.storage temperature	-45°C ~ +85°C
Relative humidity	≤ 85%
Dimension	35mm x 90mm x 62.5mm
Weight	200g

*Please advise us if you need any different specifications,we can make according to your special requirements

Related Sell

Phone

Address

E-mail

Single-Phase Two-Wire Electronic DIN-Rail Active Energy Meter (2-Pole, LCD Display)